Renewable Energy
Maximizing renewable asset performance.
support for every scale.
Utility-scale & C&I
Solar, wind, BESS, microgrid, and behind-the-meter assets across every Canadian province and 30+ U.S. states, from FEED through long-term O&M.
-
Utility-scale solar, wind, and BESS assets
Utility-scale solar, wind, BESS, and microgrid-connected assets serviced from engineering through long-term O&M.
-
Behind-the-meter assets for C&I customers
Behind-the-meter developments for commercial and industrial customers, engineered to match operating load profiles.
-
DER integration and interconnection studies
DER integration, interconnection studies, and protection coordination for distributed generation tied into utility grids.
-
Engineering MSA enablement for portfolios
Engineering MSA enablement and thermal design engineering scaled to multi-project utility portfolios.
-
Full lifecycle support from FEED through O&M
Early engagement, FEED, permitting, regulatory support, EPC, and long-term O&M under one accountable team.
-
Fleet scale and equipment depth at portfolio level
254 assets managed, 3,500 inverters, 18,615 trackers, 27,481 combiners.
OEM-certified.
Renewables O&M,
OEM certifications and Authorized Service Provider status, paired with 350+ renewables technicians and dedicated general labor crews for portfolio-scale work.
-
Solar O&M at portfolio scale, 4.5 GW LTSA
4.5 GW solar under LTSA. Long-term programs covering fault isolation, inverter, MV, and LV repairs across 3,500 inverters and 18,615 trackers.
-
Wind O&M, full-stack from pitch to top-box
Mechanical, electrical, hydraulic, and component-level wind O&M: pitch, yaw, top-box, generator, brake, and major component inspections.
-
BESS O&M, preventive and corrective work
Preventive and corrective BESS maintenance, PCS/BMS/EMS support, compliance, and 24/7 emergency response. 2+ GWh under LTSA; 1 GW+ serviced.
-
OEM-certified breadth across the platforms
Spark carries Authorized Service Provider status for major OEMs.
-
Asset performance optimization and dashboards
Performance optimization, KPI dashboards, and OEM-coordinated remote troubleshooting from the NERC-compliant ROC.
EPC, in-house.
BESS & EV charging
Engineering, OEM-direct procurement, P&C design, civil and electrical install, commissioning, and warranty support.
-
Full BESS EPC engineered and energized in-house
Custom engineering, OEM-direct procurement, P&C design, civil and electrical install, field testing, and commissioning under one team.
-
Cold and hot commissioning sequences for BESS
Cold commissioning, PCS power-up (AC first, then DC), grid sync, OV/UV protection, frequency ride-through, firmware validation.
-
Battery cabinet, BMS, and balancing checks
Battery cabinet inspection, termination verification, BMS boot, initial charging, balancing, and state-of-charge validation.
-
EV charging at scale — 10+ MW since 2017
100+ Level 2, 50+ DC Fast Chargers, 20+ Superchargers installed.
-
OEM-direct relationships protect schedule
OEM-direct relationships help protect your schedule and warranty.
-
Schedule-driven EPC delivery
Coordinated engineering, procurement, and construction to keep projects on track through commissioning and energization.
keeping renewable generation connected.
Substation services,
Engineering, construction, commissioning, and ongoing maintenance, including main power transformers, MV collector systems at 44 kV, 69 kV, and 138 kV, plus P&C, SCADA, telecom, and fiber OPGW.
-
Engineering through energization
Greenfield and brownfield substation EPC for solar, wind, and BESS interconnections.
-
Standards-aligned substation design work
Substation design to IEEE C37 and IEC 62271 — engineered for the interconnecting utility’s specific requirements.
-
Main power transformer and MV collector tie
Main power transformer and MV collector system integration at 44 kV, 69 kV, and 138 kV for utility-scale assets.
-
P&C, SCADA, telecom under one accountable scope
P&C system installation, SCADA enhancements, telecom infrastructure, and fiber OPGW under one accountable scope.
-
Annual substation maintenance and diagnostics
Annual substation maintenance, transformer diagnostics, breaker testing, and relay testing under multi-year service agreements.
-
Repowering and capacity expansion brownfield
Brownfield EPC upgrades for repowering campaigns and capacity expansion on existing renewable assets.
built to outlast.
Repowering,
Module swaps, inverter upgrades, tracker replacements, BMS firmware, blade studs, pitch ram seals, and ultracapacitor work coordinated with OEM warranty and asset owner specifications across solar, wind, and BESS portfolios.
-
Wind retrofits across pitch, blade, and CMS
Ultracapacitor and pitch motor upgrades, pitch ram and silent block replacements, Technostrobe install, and CMS sensor work.
-
Solar retrofits — modules, inverters, trackers
Module replacements, inverter swaps, tracker upgrades, combiner box replacements, Balance-of-plant electrical.
-
BESS retrofits — modules, controllers, firmware
Battery module swaps, controller replacement, midlife maintenance, firmware upgrades, grounding and surge protection.
-
Engineered and executed in-house, one team
Engineering, procurement, and field execution delivered by one accountable team for every retrofit campaign.
-
OEM and asset owner coordination on retrofits
Coordination with OEM warranty terms and asset owner specifications protects performance guarantees.
for asset owners.
Asset management,
Renewable portfolio stewardship for asset owners — OPEX/CAPEX budgeting, SCADA/DAS selection, QA/QC, procurement, and owner’s representative support across the asset lifecycle.
-
Consulting and OPEX/CAPEX budgeting work
OPEX/CAPEX budgeting, SCADA/DAS selection, procurement, and commissioning consulting for renewable portfolios.
-
Owner’s representative for owners and lenders
Independent verification against specs, codes, and OEM requirements on behalf of asset owners and lenders.
-
Performance assessment and capacity expansion
Asset performance assessments and capacity expansion planning for existing solar, wind, and BESS portfolios.
-
Lifecycle and end-of-warranty inspections
Lifecycle planning, midlife maintenance, and end-of-warranty inspections that protect long-term performance.
-
LTSA structuring across renewable portfolios
Long-term service agreement structuring and management across multi-site renewable portfolios.
In Dallas.
Remote operations center
NERC-compliant with Texas RE registration and Transmission Operator partnerships.
-
NERC-compliant operations with Texas RE partner
NERC-compliant with Texas RE registration and partnerships with Transmission Operators and Qualified Scheduling Entities.
-
24/7 asset monitoring and field dispatch
Continuous asset monitoring and technician dispatch across solar, wind, BESS, and EV charging portfolios.
-
Renewables fleet under continuous ROC monitoring
40+ utility assets and 500+ commercial assets monitored across the U.S. and Canada.
-
Fault triage to crew mobilization in one center
Alarm response, fault triage, remote troubleshooting, mobile dispatch, and utility coordination from one center.
-
Cybersecurity, encryption, custom reporting
Advanced cybersecurity, encryption, and custom reporting engineered for owner, lender, and utility audiences.
diagnose and fix.
Mobile field crews,
Commissioning, troubleshooting, QA/QC, corrective maintenance, and large-scale retrofit campaigns, sized to scope and budget, across solar, wind, and BESS.
-
Cold and hot commissioning for mobile teams
Cold commissioning, pre-energization verification, hot commissioning, and performance testing.
-
Troubleshooting and corrective field work
Diagnosing and resolving complex system issues across DC, AC, controls, and communications under one engagement.
-
QA/QC and owner’s representative coverage
Independent verification against specs, codes, and OEM requirements during construction and commissioning.
-
Preventive and reactive scope flexibility
Scheduled preventive maintenance and on-demand corrective work — flexible crew structure matched to site needs.
-
Mechanical work and retrofit labor at scale
Hardware replacements, module swaps, and large-scale retrofit campaigns delivered by dedicated general labor crews.
-
Certified and trained mobile field crews
OSHA 10/30, NFPA 70E, First Aid/CPR/AED, 29 internal mandatory training courses, plus OEM-specific certifications.
Solar Inverter Preventive Maintenance
Preventive maintenance on 60+ Sungrow inverters at a Texas solar site.
Real questions,
real answers
-
Within 24 to 72 hours for emergency response, dispatched from 16+ regional offices across Canada and the U.S.
-
Yes. Many providers specialize in either identifying problems or performing labor. Spark covers both, with highly skilled technical resources for complex diagnostics and a dedicated general labor group for cost-sensitive, high-volume remediation under one engagement.
-
Solar inverters (Siemens, Sungrow, Siemens Gamesa); BESS (Fluence, LG, Samsung and all major OEMs); trackers (Nextracker, GameChange, ATI); EV charging (Tesla, ChargePoint, ABB, Siemens, AddEnergie). Spark is an Authorized Service Provider (ASP) for major inverter OEMs.
-
350+ renewables team plus a flexible mix of highly skilled technical resources and dedicated general labor, adjustable to scope and budget. 600+ electrical tradespersons operate across 27 U.S. states and 8 Canadian provinces.
-
Asset availability and corrective work backlog are tracked monthly. Customer-reported uptime improvements are a recurring talking point in weekly performance reviews.
-
Yes. The Dallas-Fort Worth centre operates under NERC-compliant governance, cybersecurity, and encryption, with Texas RE registration and Transmission Operator partnerships. Monitoring covers 40+ utility assets and 500+ commercial assets 24/7.
Talk to a Spark Renewables expert.
The form could not be loaded. Please try again later.